You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Home > SimplicityTouch > GEN 4 SimplicityTouch Panel > How to Install XPress with a USB Drive
How to Install XPress with a USB Drive
print icon

Installing XPress

  1. Download XPress from the below link. Click "Download XPress for Android"
    XPress Download Page
     
  2. Copy contents to a USB flash drive. Plug the USB drive into a USB port on the panel.
     
  3. Power on the panel and wait for it to boot up.
     
  4. Press the Home button on the remote or the panel keypad. Then select the Apps icon. 

     
  5. Now select the File icon.

     
  6. Select your USB drive.

     
  7. Tap the XPress file .

     
  8. Now select Install.

     
  9. If this message pops up, tap Settings. Then please follow steps 9 - 12. If this message does not pop up, please skip to step 13.

     
  10. Give the SimplicityApp Store and the ES File Explorer access by tapping the grey dot so it turns green.


     
  11. Once you have given access to both of them, press the back button on the remote or panel. That will bring you back to this screen. Now tap the XPress file again.

     
  12. Select Install.

     
  13. That will bring you to this screen. Tap Install in the bottom right corner.

     
  14. Once it has finished installing, tap Open.

     
  15. Tap the three lines in the top right corner of XPress.
     
  16. Then tap the Settings icon.
     
  17. Then tap the About tab. This will tell what version of XPress you now have installed.

 

If none of these solutions help resolve your issue go ahead and submit a support ticket: Click Here

Was this helpful?
0 out of 0 found this helpful

scroll to top icon