Camera Image Is Flipped Horizontally or Vertically in XPress

If using a SimplicityCam within XPress on the SimplicityTouch IFP the camera image might be flipped either horizontally or vertically.  If this is happening it is very easy to fix.

Open XPress and then:

1) Open the side menu by tapping on the three lines at top right edge of the screen. 2) Then tap on the settings button (gear shaped) at bottom corner.

3) Then change the flip camera vertically and/or flip camera horizontally settings as needed.

4) Exit settings.

The settings will then be saved and will apply automatically when camera is added to XPress page.  The settings can be modified at any time if needed.


  • 40
  • 04-May-2017